Science

Magnification: What 10x Really Shows You

Magnification: What 10x Really Shows You

The number printed on binoculars and shouted on telescope boxes sounds simple: 10x, 40x, 100x. But magnification is one of the most misunderstood numbers in optics. It tells you how much larger things appear, and almost nothing about how clear, bright or steady the view will be. Two instruments with the same magnification can show you very different worlds.

What the x number actually means

A magnification of 10x means the object appears ten times larger in angular size, as if it were ten times closer. A deer standing 100 metres away looks, through 10x binoculars, the way it would look from 10 metres with the naked eye. Binoculars print two numbers, such as 10x42. The first is the magnification. The second is the diameter of the front objective lenses in millimetres, 42 mm here, and that quieter second number controls how much light the binoculars gather. Divide the objective by the magnification and you get the exit pupil: 42 divided by 10 is 4.2 mm for a 10x42 pair, a useful clue to how the view holds up in dim light.

Telescopes: one division decides the power

A telescope, unlike binoculars, has no fixed magnification at all. The power comes from a single division: the focal length of the telescope divided by the focal length of the eyepiece you drop into it. Take a telescope with a 1,000 mm focal length. With a 25 mm eyepiece it gives 1,000 divided by 25, which is 40x. Swap in a 10 mm eyepiece and the same telescope gives 1,000 divided by 10, which is 100x. The telescope never changed. Only the eyepiece did, which is why one telescope can honestly offer a whole range of magnifications, and why swapping eyepieces beats buying a bigger box number.

Binocular code 10x42: 10x magnification, 42 mm objective lenses

Exit pupil of a 10x42: 4.2 mm

1,000 mm telescope with a 25 mm eyepiece: 40x

Same telescope with a 10 mm eyepiece: 100x

Why more is not always better

Every step up in magnification spreads the same gathered light over a larger image, so the view gets dimmer. It also magnifies the shake in your hands and the shimmer of warm air, which is why a high power view often wobbles and boils. Observers use a rough ceiling of about 2 times the aperture in millimetres for useful magnification on a steady night, and the atmosphere usually lowers that limit further. Past the ceiling you get empty magnification: a bigger picture with no new detail inside it. The sweet spot is usually a modest power with a bright, sharp, steady image, not the biggest number printed on the box.

Check any telescope and eyepiece pairing in our Magnification Calculator before you buy the next eyepiece.

Sources: the telescope magnification formula follows Telescope Advisor and Telescope Guides; the meaning of binocular numbers and the exit pupil follow LensSpan and Maven Built. Example figures computed exactly from the focal lengths stated in the story.