Building Stairs: The Rise and Run Rules That Keep Steps Safe
A staircase is the one piece of carpentry your body inspects every day. Steps that are a little too tall or a little too shallow feel wrong on the first climb, and the reason good stairs feel effortless is that builders follow two old rules: one about comfort, and one hard limit from the building code.
The comfort rule: 2R + T
Carpenters have sized steps for centuries with a formula credited to the French architect Francois Blondel: twice the riser height plus the tread depth should land near 25 inches. The riser is the vertical face you climb; the tread is the flat part your foot lands on. The classic pairing, a 7 inch riser with an 11 inch tread, gives 2 times 7 plus 11, which is exactly 25. Push the riser taller and the tread must shrink to keep the total, which is why steep stairs feel cramped: your stride is being spent on climbing instead of stepping.
A full staircase worked out: 108 inches of rise
Take a floor to floor height of 108 inches, a common 9 foot climb. Dividing by a target riser of 7 inches gives 15.4, and since risers must be whole and identical, the count rounds to 16 risers. The true riser height is then 108 divided by 16, which is 6.75 inches each. The comfort rule sets the tread: 25 minus twice 6.75 leaves an 11.5 inch tread. There is always one fewer tread than risers, because the upper floor itself is the last landing, so this stair has 15 treads. Its total run is 15 times 11.5, which is 172.5 inches, or 14 feet 4.5 inches of floor space, at a comfortable angle of about 30 degrees.
Total rise: 108 in (9 ft)
Risers: 16 at 6.75 in each
Tread depth: 11.5 in (2R + T = 25)
Treads: 15
Total run: 172.5 in (14 ft 4.5 in)
Code limits (IRC): riser max 7.75 in, tread min 10 in
The code limits behind the comfort
Comfort is a guideline; code is the law. Under the International Residential Code used across most of the United States, a residential riser may not exceed 7.75 inches and a tread must be at least 10 inches deep. Our worked stair sits safely inside both limits, with a 6.75 inch riser and an 11.5 inch tread. The code also insists every riser in a flight matches the others within a small tolerance, because your foot learns the pattern after two steps and trusts it. Plan your own flight with our Stair Calculator and check the riser, tread and run before any wood is cut.
Comfort rule and code limits verified against GetCalcu and RenoSheets stair guides and the International Residential Code limits they cite, November 15, 2026. Step counts, riser height, tread depth and total run computed exactly from the stated 108 inch total rise.