Property

How Many Bricks in a Wall? The Mortar Joint Decides

How Many Bricks in a Wall? The Mortar Joint Decides

Count the bricks in a wall and you are really counting something else: the mortar. The thin lines of cement between the bricks take up so much of the wall that they decide the famous rule of thumb, about 60 bricks for every square metre of single skin wall. Here is where that number comes from, and how to use it without coming up short.

The brick is bigger than you think

A standard brick in Britain measures 215 mm long and 65 mm high. But no brick sits alone. Each one is laid with a mortar joint of about 10 mm beside it and below it, so the space one brick actually covers in the wall is 225 mm by 75 mm. Multiply those and one brick accounts for 0.016875 square metres of wall. Divide one square metre by that figure and you get 59.3, which the trade rounds to 60 bricks per square metre.

That is for a single skin, a wall one brick thick, the kind used for garden walls and the outer face of a house. A double skin wall, two bricks thick, simply doubles the count to about 120 per square metre.

Single skin: about 60 bricks per square metre

Double skin: about 120 bricks per square metre

Worked example: a garden wall 4 m long and 2.4 m high is 9.6 square metres, so about 576 bricks single skin

With 10 percent spare: order about 635 bricks for that wall

Why the spare bricks are not waste

Bricks break in transit, get cut at ends and corners, and occasionally arrive cracked. A common allowance is 10 percent on top of the counted number, which turns the 576 bricks in the example into roughly 635. Running out mid wall is worse than having some left over: a fresh delivery can come from a different batch, and brick colours vary enough between batches to show as a patch on a finished wall.

Sizes change across borders

The 60 per square metre rule belongs to the British brick. A common modular brick in the United States is smaller, 194 mm long and 57 mm high, and works out at about 7 bricks per square foot once its joints are counted. The method never changes, only the brick does: measure the brick, add the joint, divide the wall area by the result.

Run your own wall through our Brick Calculator and it will count the bricks, and the mortar to lay them, from your measurements.

Brick sizes and counts in this story are common examples, checked on November 18, 2026. Sizes vary by country and maker, so measure your brick before ordering.