Property

Flooring: Why You Always Buy More Than the Room Measures

Flooring: Why You Always Buy More Than the Room Measures

Measure a room for new flooring and the tape gives you one clean number. Order exactly that number and the job will almost certainly stall a few planks short of the last wall. Installers are not being careless when they tell you to buy more than the room measures. The extra material, called the waste allowance, is a planned part of every floor, and the standard percentages behind it are well established.

Where the extra flooring actually goes

Almost no piece of flooring runs wall to wall untouched. Every row ends with a cut, joints are staggered so offcuts vary in length, and some of those offcuts are too short to use anywhere. Boards arrive with the occasional damaged edge or a color that does not match the run. Add a miscut or two, even for a careful worker, and a room quietly consumes several percent more material than its flat area. The allowance simply admits this in advance instead of during a second trip to the store.

Room area: 180 sq ft

Straight layout, add 10%: 198 sq ft

Diagonal layout, add 15%: 207 sq ft

Extra material at 10%: 18 sq ft

Extra material at 15%: 27 sq ft

The pattern sets the percentage

Installation guides are consistent on the figures: add about 10 percent for a standard straight layout in a rectangular room, and about 15 percent for a diagonal layout, herringbone, or a room full of corners and doorways. Diagonal work wastes more because every board along the walls is cut at an angle, and angled offcuts rarely fit anywhere else. On a 180 square foot room, the straight layout needs 198 square feet of flooring and the diagonal needs 207. Complex patterns can push the allowance toward 20 percent. The shape of the room matters too: a plain rectangle is the kindest case, while L-shaped rooms, hallways with several doorways and floors that run around kitchen islands all force more cuts per square foot. If your room is awkward, treat the higher allowance as your starting point even for a straight layout.

Boxes, leftovers and the spare plank rule

Flooring is sold by the box, so the final step is rounding your total up to whole boxes, never down. Keep one box unopened if you can: a plank damaged years later can only be matched from the same production run, and the spare box is the cheapest insurance you will ever buy for a floor. Many stores take back unopened boxes, which makes ordering slightly over far safer than ordering slightly under. Order the whole job in one go where you can, because a top-up order weeks later may come from a different production run with a slightly different shade. For your own room sizes and layout, our Flooring Calculator applies the right allowance for you.

Sources: waste allowances checked against the BuildFigure flooring waste guide and the McMillan Floors measuring guide. The room size is an example checked on November 15, 2026; real measurements and prices vary and may change.