Property

Roof Pitch: Rise Over Run, Explained Simply

Roof Pitch: Rise Over Run, Explained Simply

Roofers talk about steepness in a code that looks like a fraction: 4/12, 6/12, 9/12. It is not really a fraction. It is a simple promise about how much the roof climbs over a fixed horizontal distance, and once you see the pattern, every pitch number on a quote or a plan becomes easy to read.

Rise over run, with the run fixed at 12

The first number is the rise: how many inches the roof climbs vertically. The second number is the run: the horizontal distance over which that climb happens, and by long convention the run is always 12 inches. So a 4/12 roof climbs 4 inches for every 12 inches it travels across. A 9/12 roof climbs 9 inches over the same foot. The run is horizontal, not measured up the slope itself, which is the one point that trips people up. Because the run never changes, pitches compare directly: double the first number and you have doubled the steepness. You can measure a pitch from inside the attic with a level and a tape, which keeps you off the roof entirely.

The same slope in degrees

Builders also meet pitch as an angle, and the bridge between the two is the arctangent of rise divided by run. A 4/12 pitch works out to about 18.4 degrees, a gentle slope you see on many ranch style homes. A 6/12 pitch is about 26.6 degrees, the classic suburban roof. A 9/12 pitch reaches about 36.9 degrees, steep enough that roofers treat it with respect. Percent grade is the third outfit for the same number: a 6/12 pitch is a 50 percent grade, because it climbs half as much as it travels. The scale tops out neatly: a 12/12 pitch climbs 12 inches in 12, which is exactly 45 degrees.

4/12 pitch: 18.4 degrees, area multiplier 1.054

6/12 pitch: 26.6 degrees, area multiplier 1.118

9/12 pitch: 36.9 degrees, area multiplier 1.250

12/12 pitch: 45 degrees exactly

Why the multiplier matters for materials

Pitch also changes how much roof you actually own. The sloped surface is always longer than the flat area it covers, and the slope factor tells you by how much. Multiply the flat plan area by the factor for your pitch: a roof that covers 1,000 square feet of house at 6/12 has about 1,118 square feet of real surface to shingle, because the factor for 6/12 is 1.118. At 4/12 the same house needs only about 1,054 square feet of material, while a steep 9/12 roof needs about 1,250. Order by the flat number and the steep roof runs short. Check any rise and run with our Roof Pitch Calculator for the angle and factor together.

Rise over run definition and pitch to degree conversions verified against Roofr and The Building Code roofing guides, November 15, 2026. Angles and slope factors computed exactly with the arctangent and square root formulas stated in the story.