How Much Paint Does a Room Need? Measure Once, Buy Once
Paint is sold by the gallon, but rooms are measured in square feet, and the gap between those two units is where most decorating budgets go wrong. Buy too little and you are driving back to the store mid-job with a wet roller. Buy far too much and money sits in sealed cans in the garage. The fix is a five-minute measurement and one coverage figure the paint makers themselves publish.
Start with the walls, not the floor
The floor size of a room is a trap; what matters is wall area. Add the length of all four walls to get the perimeter, then multiply by the wall height. A room 12 feet by 15 feet has a perimeter of 54 feet, and with 8-foot walls that gives 432 square feet of wall. Next, subtract the parts you will not paint. The measuring guide published by Behr counts about 20 square feet for a standard door and about 15 square feet for an average window. One door and two windows remove 50 square feet, leaving 382 square feet to cover per coat.
Room: 12 by 15 ft, walls 8 ft high
Total wall area: 432 sq ft
Minus one door and two windows: 50 sq ft
Area per coat: 382 sq ft
Two coats: 764 sq ft
Coverage used: 350 sq ft per gallon
Paint to buy: 2.2 gallons, so 3 gallons
Coats and coverage decide the gallons
Sherwin-Williams and Behr both rate a gallon of interior paint at roughly 350 to 400 square feet per coat on smooth walls, and planning on the lower figure, 350, is the safe habit. Two coats are standard for an even finish and a true color, and two coats simply double the area: 382 times 2 is 764 square feet. Divide 764 by 350 and you get 2.18 gallons. Paint is not sold in fractions beyond quarts, so the practical buy is 3 gallons, or 2 gallons plus a quart if you want to keep the leftover small.
Small habits that save a second trip
Color changes matter as much as measurements. Painting a light color over a dark wall, or the reverse, can demand a third coat before the finish looks even, and a third coat adds roughly half as much paint again. When the color jump is dramatic, budget for that extra coat in the first purchase rather than discovering it with the second coat half finished.
Rough or unpainted walls drink more paint than smooth ones, and a primer coat on fresh plaster is money well spent. Keep the leftover from your final can for touch-ups, and note the color name and code before the label gets splashed. When your room is a different shape, skip the guesswork and put your own measurements into our Paint Calculator for the gallon count in seconds.
Sources: coverage ranges published by Sherwin-Williams and Behr (350 to 400 sq ft per gallon per coat); door and window deductions follow the Behr measuring guide. Room dimensions are an example checked on November 15, 2026; real rooms vary.